nvo:Ep
Endpoint for Network Virtualization Overlay Object.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | nw:AdminSt (scalar:Enum8) |
Administrative Up or Down state of the NVE. | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| advertiseVmac | scalar:Bool |
Enable or disable Virtual MAC Advertisement in VPC mode. | SELECTION: true or false DEFAULT: 0 |
| anycastIntf | nw:IfId (base:IfIndex) |
Anycast Source Interface associated with the NVE. | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| autoRemapReplicationServers | scalar:Bool |
Configures auto remapping of VNIs for controller-based replication servers. | SELECTION: true or false |
| cfgSrc | nvo:CfgSrcT (scalar:Enum16) |
Enable or disable VxLAN configuration via controller. | SELECTION: 0 - unknown 1 - cli 2 - controller DEFAULT: 0 |
| controllerId | scalar:Uint32 |
Controller ID (applicable when host reachability proto is controller). | RANGE: [0, 4294967295] DEFAULT: 0 |
| descr | string:Basic |
Description for the NVE | A sequence of characters |
| encapType | nvo:EncapT (scalar:Enum16) |
Encapsulation Type. | Supported value is VxLAN. SELECTION: 0 - unknown 1 - vxlan 2 - vxlan-tun-ctrl-frame 3 - vxlan-tun-ctrl-frame-lacp 4 - vxlan-tun-ctrl-frame-stp 5 - dot1q 6 - dot1q-tun-ctrl-frame 7 - dot1q-tun-ctrl-frame-lacp 8 - dot1q-tun-ctrl-frame-stp DEFAULT: 0 |
| epId | nvo:EpIdT (scalar:Uint32) |
Network Virtualization Overlay Endpoint (NVE) ID | Supported values for N9000 Family is 1. RANGE: [0, 4294967295] |
| holdDownTime | scalar:Uint16 |
Hold Down Time. | Supported values are 1 to 1500 (in seconds). RANGE: [1 , 1500] DEFAULT: 180 |
| hostReach | nvo:HostReachT (scalar:Enum16) |
Host Reachability Protocol. | Supported modes are bgp or controller. SELECTION: 0 - Flood-and-learn 1 - bgp 2 - controller 3 - openflow 4 - openflowIR DEFAULT: 0 |
| ingressReplProtoBGP | scalar:Bool |
VxLAN Ingress Replication Protocol BGP. | SELECTION: true or false |
| mcastGroupL2 | mcast:GrpIp (address:Ip) |
Base multicast group address for L2. | Value must match ipv4 or ipv6 known format |
| mcastGroupL3 | mcast:GrpIp (address:Ip) |
Base multicast group address for L3. | Value must match ipv4 or ipv6 known format |
| mcastRtSrcIntf | nw:IfId (base:IfIndex) |
mcast-routing source interface | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| multisiteBordergwInterface | nw:IfId (base:IfIndex) |
Interface representing the Multisite Border Gateway. | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| sourceInterface | nw:IfId (base:IfIndex) |
Source Interface associated with the NVE. | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| suppressARP | scalar:Bool |
Suppress ARP. | SELECTION: true or false |
| suppressMacRoute | scalar:Bool |
Suppress MAC Route. | SELECTION: true or false |
| virtualMac | address:MAC |
Custom Virtual Router MAC address configuration for VPC VxLAN. | Value must match MM:MM:MM:SS:SS:SS format |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| adminStMultisiteBrdrGwLoopackIntf | nw:AdminSt (scalar:Enum8) |
Administrative State Up or Down of Multisite Border Gateway Loopback Interface. | SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled |
| delayRestoreMsBrdrGwExpiryTime | nvo:ETimeStamp (scalar:Date) |
Time when delay restore for Multisite Border Gateway Loopback Interface will expire. | SELECTION: 0 - NA DEFAULT: NA |
| holdDownTimerExpiryTime | nvo:ETimeStamp (scalar:Date) |
Indicates the time after which the hold down timer will expire (in milliseconds). | SELECTION: 0 - NA DEFAULT: NA |
| holdUpTime | scalar:Uint16 |
Supported values are 1 to 1000 (in seconds). The time for which the Source Interface will be held operationally Up in VPC mode during bring-down. |
RANGE: [0, 65535] |
| holdUpTimerExpiryTime | nvo:ETimeStamp (scalar:Date) |
Indicates the time after which the hold up timer will expire (in milliseconds). | SELECTION: 0 - NA DEFAULT: NA |
| learningMode | nvo:HostLearnModeT (scalar:Enum16) |
Indicates the host learning mode (Control plane or data plane). | SELECTION: 1 - DP 2 - CP 3 - Ctrlr DEFAULT: DP |
| mac | address:MAC |
Local Router MAC address | Value must match MM:MM:MM:SS:SS:SS format |
| multisiteBrdrGwIntfIp | address:IPv4 |
IPv4 address assigned to Multisite Border Gateway Interface Loopback. | Value must match ipv4 format |
| operEncapType | nvo:EncapT (scalar:Enum16) |
Operational encapsulation type. | SELECTION: 0 - unknown 1 - vxlan 2 - vxlan-tun-ctrl-frame 3 - vxlan-tun-ctrl-frame-lacp 4 - vxlan-tun-ctrl-frame-stp 5 - dot1q 6 - dot1q-tun-ctrl-frame 7 - dot1q-tun-ctrl-frame-lacp 8 - dot1q-tun-ctrl-frame-stp DEFAULT: 0 |
| operStAnycastSrcIntf | l2:DomOperSt (scalar:Enum8) |
Operational State Up or Down of NVE Anycast Source Loopback Interface. | SELECTION: 1 - up 2 - down 3 - unknown DEFAULT: down |
| operStMultisiteBrdrGwLoopbackIntf | l2:DomOperSt (scalar:Enum8) |
Operational State Up or Down of Multisite Border Gateway Loopback Interface. | SELECTION: 1 - up 2 - down 3 - unknown DEFAULT: down |
| operStSrcLoopbackIntf | l2:DomOperSt (scalar:Enum8) |
Operational State Up or Down of NVE Source Loopback Interface. | SELECTION: 1 - up 2 - down 3 - unknown DEFAULT: down |
| operState | l2:DomOperSt (scalar:Enum8) |
Operational State of the NVE. | SELECTION: 1 - up 2 - down 3 - unknown DEFAULT: down |
| primaryIp | address:IPv4 |
Primary IP of NVE Source Loopback Interface. | Value must match ipv4 format |
| primaryIpv6 | address:IPv6 |
Primary IPv6 of NVE Source Loopback Interface. | Value must match ipv6 format |
| secondaryIp | address:IPv4 |
The Lowest Secondary IP of NVE Source Loopback Interface. | Value must match ipv4 format |
| secondaryIpv6 | address:IPv6 |
Secondary IPv6 of NVE Source Loopback Interface. | Value must match ipv6 format |
| virtualRtrMac | address:MAC |
Virtual Router MAC address for VPC VxLAN. | Value must match MM:MM:MM:SS:SS:SS format |
| virtualRtrMacReorig | address:MAC |
Virtual Router Re-origination MAC address for Multisite VxLAN. | Value must match MM:MM:MM:SS:SS:SS format |
| vpcVIPNotified | scalar:Bool |
Flag to indicate that Virtual IP configuration for the NVE source interface has been enabled in VPC mode. | SELECTION: true or false |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |